| Customization: | Available |
|---|---|
| Structure: | Single End |
| Pressure: | Medium Pressure Mechanical Seals |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Parameter | Details |
|---|---|
| General Information | |
| Model Number | QT - H7N |
| Application | Suitable for a wide range of industrial pumps, compressors, and other rotating equipment in chemical, petroleum, and power generation industries. |
| Dimensions | |
| Shaft Diameter Range | 20 - 100 mm |
| Outer Diameter | 35 - 120 mm |
| Width | 15 - 30 mm |
| Materials | |
| Seal Face Material | Silicon carbide (hard) and carbon graphite (soft). The silicon carbide seal face has a hardness of approximately 2500 - 3000 HV, providing excellent wear - resistance. The carbon graphite seal face has a density of about 1.7 - 1.9 g/cm³, offering good self - lubricating properties. |
| Secondary Seal Material | A high - performance elastomer. It has a Shore A hardness of 70 - 80, which ensures a reliable seal and good flexibility. |
| Metal Parts Material | Stainless steel (AISI 316). It has a tensile strength of 485 - 655 MPa and a yield strength of 205 - 310 MPa, providing high corrosion resistance and mechanical strength. |
| Operating Conditions | |
| Pressure Range | 0 - 10 MPa. The seal can maintain its sealing performance within this pressure range, suitable for both low - pressure and high - pressure applications. |
| Temperature Range | - 40°C to 200°C. The materials used in the seal are selected to withstand a wide temperature range, ensuring stable operation in different environments. |
| Speed Range | 0 - 30 m/s. This speed range allows the seal to be used in various rotating equipment with different rotational speeds. |
| Performance Characteristics | |
| Leakage Rate | Less than 5 ml/h under normal operating conditions. This low leakage rate ensures the safety and environmental - friendliness of the equipment. |
| Friction Coefficient | 0.1 - 0.2. A relatively low friction coefficient reduces energy consumption and wear of the seal faces. |
| Service Life | More than 20,000 hours under normal operating conditions. This long service life reduces maintenance frequency and costs. |
| Installation Requirements | |
| Installation Clearance | The radial clearance between the seal and the shaft should be 0.1 - 0.3 mm, and the axial clearance should be 0.2 - 0.5 mm. |
| Installation Torque | For the bolts used in the seal installation, the torque should be in the range of 10 - 20 N·m, ensuring a proper installation without over - tightening or under - tightening. |
| Testing Standards | |
| Pressure Test | The seal is tested at 1.5 times the maximum operating pressure for 30 minutes, and no visible leakage is allowed. |
| Temperature Cycle Test | The seal is subjected to 10 temperature cycles from - 40°C to 200°C, and its performance should remain stable after the test. |
Shanghai Queeny Mechanical Equipment Co.,Ltd.is an enterprise specializing in the R&D,manufacture and export of mechanical seal products,headquartered in Pudong New Area,Shanghai.Our products mainly include component seals,dry gas seals,metal bellows seals,mixer and agitator seals,single & dual cartridge seals,silicon carbide parts and tungsetn carbide parts,which can replace John Crane, Burg-mann, AES, Chesterton,Flowserve,Rotenand other similar products,they are widely used in water treatment,petroleum,chemical,food,medical and other industries.
){kind=link}