Customization: | Available |
---|---|
Structure: | Single End |
Pressure: | High Pressure Mechanical Seals |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Parameter Category
|
Specific Parameter
|
Detailed Description
|
Basic Information
|
|
|
Seal Type
|
Queeny-JCS2P Mechanical Seal
|
A high - performance mechanical seal designed for a wide range of industrial pumping applications, providing reliable and efficient sealing solutions.
|
Brand
|
[Insert Brand Name]
|
|
Model
|
Queeny-JCS2P
|
Specifically engineered to meet the demanding requirements of various fluid handling systems.
|
Materials
|
|
|
- Rotating Ring
|
Tungsten Carbide
|
Offers excellent hardness and wear resistance, ensuring long - term durability under high - speed and high - pressure conditions.
|
- Stationary Ring
|
Carbon Graphite
|
Known for its low friction coefficient and good self - lubricating properties, which help in reducing wear and improving sealing performance.
|
- O - Ring
|
Fluoroelastomer (FKM)
|
Provides a tight seal and is resistant to a broad spectrum of chemicals, oils, and temperatures, ensuring consistent performance.
|
Size Specifications
|
|
|
Shaft Diameter Range
|
25 - 60 mm
|
Can be installed on shafts with diameters within this range, making it suitable for numerous pump models.
|
Seal Chamber Inner Diameter
|
35 - 70 mm
|
Designed to fit snugly into seal chambers with inner diameters in this range for proper installation and optimal operation.
|
Seal Width
|
10 mm
|
The 10 - mm width is carefully selected to balance sealing effectiveness and mechanical strength, minimizing the risk of leakage and component failure.
|
Performance Parameters
|
|
|
Working Pressure
|
Maximum 2.0 MPa
|
Under normal operating conditions, the seal can effectively withstand a maximum pressure of 2.0 MPa, preventing the leakage of pumped fluids.
|
Working Temperature
|
-25ºC - 180ºC
|
Capable of operating efficiently within this wide temperature range, adapting to both extremely cold and high - temperature industrial environments.
|
Linear Velocity
|
Maximum 12 m/s
|
Can handle high - speed rotations with a maximum linear velocity of 12 m/s, maintaining stable sealing performance even at rapid shaft speeds.
|
Applicable Media
|
|
|
- Water - based Fluids
|
Suitable for fresh water, seawater, and various aqueous solutions with pH values ranging from 2 to 13.
|
|
- Oil - based Fluids
|
Compatible with mineral oils, synthetic lubricants, and many industrial hydraulic oils.
|
|
- Chemical Fluids
|
Resistant to common acids, alkalis, and solvents, making it suitable for chemical processing applications.
|
|
Installation and Maintenance
|
|
|
Installation Method
|
Axial Installation
|
Installed axially onto the pump shaft following a precise installation procedure to ensure correct alignment and a secure seal.
|
Installation Torque
|
18 - 23 N·m
|
During installation, a torque within this range should be applied to fasten the seal components properly, avoiding over - tightening or under - tightening.
|
Maintenance Cycle
|
Every 4000 operating hours
|
Regular maintenance is recommended every 4000 operating hours, including visual inspections for wear, leakage, and any signs of damage to the seal components.
|
Storage Conditions
|
Store in a dry, dust - free environment at temperatures between 5ºC - 25ºC. Keep away from direct sunlight and sources of radiation.
|
Proper storage conditions help preserve the integrity of the seal materials and extend its shelf life.
|
Quality and Certification
|
|
|
Service Life
|
Approximately 2 - 3.5 years under normal operating conditions
|
With proper operation and maintenance, the Queeny-JCS2P seal can provide reliable service for 2 to 3.5 years.
|
Leakage Rate
|
≤0.05 mL/h
|
Engineered to have an extremely low leakage rate, ensuring minimal fluid loss and enhanced system efficiency.
|
Certification Standards
|
ISO 9001, ISO 14001, and industry - specific certifications (e.g., API 682 for some applications)
|
Meets international quality management and environmental management system standards, as well as relevant industry - specific requirements.
|
Other Characteristics
|
|
|
Vibration Resistance
|
Can withstand vibrations with a frequency range of 8 - 60 Hz and an amplitude of 0.6 mm.
|
Designed to maintain its sealing integrity even in environments with significant mechanical vibrations.
|
Self - lubricating Feature
|
The sealing surfaces are treated with a special coating to enhance self - lubrication, reducing friction and wear.
|
This self - lubricating property contributes to longer seal life and lower maintenance costs.
|