Mechanical Seal Mg12, Pump Seal

• Customization: Available
• Structure: Single End
• Pressure: Medium Pressure Mechanical Seals
• Model NO.: QT-MG12
• Speed: General Speed Mechanical Seal
• Temperature: Poor Temperature Mechanical Seal
• Performance: Wear
• Standard: Standard
• Type: Qt-Mg12
• Balance: Unbalanced
• Brand: Queeny
• Delivery Time: Stock
• Price: Lower Than Original
• Quality: 12 Month Guarantee
• Transport Package: Customzed
• Specification: standard
• Trademark: Queeny
• Origin: China
• HS Code: 84842000
• Production Capacity: 5000
• Package Size: 10.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 1.000kg

Product Description

Parameter	Details
Model	QT-MG12
Seal Type	Single-Ended, Unbalanced
Size Range	12 mm - 50 mm
Operating Pressure	Maximum: 1.6 MPa (232 psi)
Operating Temperature	-40°C to 200°C (-40°F to 392°F)
Shaft Speed	Up to 3000 RPM
Face Material	Carbon Graphite (Stationary) Silicon Carbide (Rotating)
Face Flatness	≤0.0009 μm
Face Roughness	Ra ≤0.2 μm (Carbon Graphite) Ra ≤0.4 μm (Silicon Carbide)
Spring Material	Stainless Steel 316
Spring Rate	5 N/mm
Spring Quantity	12 pieces
O-Ring Material	HNBR
O-Ring Hardness	70 Shore A
O-Ring Compression Ratio	15% - 20%
Seal Chamber Diameter Tolerance	±0.05 mm
Shaft Diameter Tolerance	±0.03 mm
Axial Runout	≤0.05 mm
Radial Runout	≤0.02 mm
Installation Torque	8 - 12 N·m
Fluid Compatibility	Water, Oil, Alcohols, Weak Acids and Bases
Leakage Rate	≤5 ml/h (at 0.6 MPa pressure)
Vibration Limit	≤5.6 mm/s (RMS)
Maximum Axial Load	50 N
Minimum Axial Load	10 N
Storage Conditions	Dry environment, temperature between 0°C - 30°C, humidity ≤60%
Service Life	Approximately 8000 - 10000 operating hours under normal conditions
Weight (approximate)	0.15 kg (for 20 mm size)
Assembly Clearance	0.1 - 0.3 mm
Disassembly Force	≤30 N
Pressure Holding Time	≥30 minutes at rated pressure
Corrosion Resistance	Good resistance to general corrosion in common media
Chemical Resistance	Resistant to most organic solvents, except strong oxidants
Impact Resistance	Can withstand impact force ≤50 N·m
Fatigue Life	≥10^6 cycles under alternating pressure
Thermal Conductivity (Face Material)	120 W/(m·K) (Silicon Carbide) 15 W/(m·K) (Carbon Graphite)
Specific Gravity (Face Material)	3.1 g/cm³ (Silicon Carbide) 1.8 g/cm³ (Carbon Graphite)
Tensile Strength (Face Material)	400 MPa (Silicon Carbide) 30 MPa (Carbon Graphite)
Compressive Strength (Face Material)	1500 MPa (Silicon Carbide) 100 MPa (Carbon Graphite)
Hardness (Face Material)	2500 - 3000 HV (Silicon Carbide) 80 - 120 HB (Carbon Graphite)

 

Queeny design engineers are able to produce a seals solution for the most basic applications,to those that are extremely complicated and unique. We are able to provide you these solutions supported by life test data and years of excellent field performance.As your partner, we provide sealing solutions for centrifugal pumps,agitators and other rotating equipment, and help you consolidate your brand and market position.

Mechanical sealing adopts the principle of mechanical friction sealing, which has excellent sealing performance, which can effectively prevent leakage and protect the safety of the environment and equipment. Compared with traditional packing seals and rotary seals, the sealing effect of mechanical seals is more reliable.

 

Our products are made of high quality materials and manufacturing processes, with a long service life and low cost of use. It can effectively reduce the maintenance costs and operating costs of equipment .

Our mechanical seals are designed to be easy to service and replace,simply by removing the sealing components and replacing the sealing surface and sealing ring. Compared with other sealing forms, our products are more convenient to repair and replace.

 

Mechanical seal is suitable for high temperature, low temperature, high pressure, vacuum and corrosive media and other complex environment, to ensure the stable operation of the equipment.

Shanghai Queeny Mechanical Equipment Co.,Ltd.is an enterprise specializing in the R&D,manufacture and export of mechanical seal products,headquartered in Pudong New Area,Shanghai.Our products mainly include component seals,dry gas seals,metal bellows seals,mixer and agitator seals,single & dual cartridge seals,silicon carbide parts and tungsetn carbide parts,which can replace John Crane, Burg-mann, AES, Chesterton,Flowserve,Rotenand other similar products,they are widely used in water treatment,petroleum,chemical,food,medical and other industries.
Relying on first-class technology and professional services,since its establishment, Queeny has carried out in-depth cooperation with hundreds of companies in more than 70 countries around the world.Our products are exported to Asia,Europe,North America,South America,Oceania and Africa in large quantities every year,and have been widely praised.Super high cost performance is the basis of our long-term cooperation with customers.We always rigorously treat clients' requirements,strictly control the production process,and comprehensively monitor the export procedure.It is our mission to reduce production and operation costs for more enterprises all over the world.

Q1: Are you a trading company or a factory?
We are a factory, so we can offer you factory prices with high quality.

Q2: Can I get samples?
Yes. You can ask for samples. Usually it's free, but you need to pay for shipping.

Q3: Can l use my own logo or design on the goods?
Yes, we provide OEM/ODMservices; your logo and design can be printed on the products.

Q4: What are your payment terms?
We accept T/T, Paypal, Western Union, and credit card payment is also welcome.

Q5: How about the delivery time?
For stock items, we can ship immediately after receiving the payment.
For other products, we need 14-25 days for mass production, which depends on the quantity and type of order.

Q6: How can we ensure the quality?
Pre-production samples are required before mass production;Final inspection is required before shipment;

Q7: 1 can't find our products in your catalog, can you customize the products for us?
Yes, customized products are available, OEM is welcome.

Q8: Can l buy pumps or pump parts from your company?
Yes, we also provide pumps and pump parts.