| Customization: | Available |
|---|---|
| Structure: | Single End |
| Pressure: | High Pressure Mechanical Seals |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Parameter Category
|
Specific Parameter
|
Detailed Description
|
|
Basic Information
|
|
|
|
Seal Type
|
Queeny - SLC Mechanical Seal
|
A high - performance mechanical seal designed for industrial pumps and equipment, providing reliable and efficient sealing solutions.
|
|
Brand
|
[Insert Brand Name]
|
|
|
Model
|
Queeny - SLC
|
|
|
Materials
|
|
|
|
- Rotating Ring
|
Silicon Carbide (SiC)
|
SiC offers excellent hardness and wear resistance, ensuring the rotating ring can endure high - speed and high - pressure operations, which is crucial for long - term performance.
|
|
- Stationary Ring
|
Tungsten Carbide
|
Tungsten carbide provides high strength and good corrosion resistance, creating a stable and effective sealing interface with the rotating ring.
|
|
- O - Ring
|
Fluoroelastomer (FKM)
|
The FKM O - ring provides a tight seal and is resistant to a wide range of chemicals, oils, and temperature variations, ensuring leak - free operation.
|
|
Size Specifications
|
|
|
|
Shaft Diameter Range
|
12 - 45 mm
|
Suitable for shafts within this diameter range, allowing for compatibility with various pump models and sizes.
|
|
Seal Chamber Inner Diameter
|
22 - 55 mm
|
Designed to fit into seal chambers with inner diameters in this range, ensuring proper installation and alignment.
|
|
Seal Width
|
8.5 mm
|
This width is optimized to balance sealing effectiveness and reduce friction between the seal faces, enhancing overall efficiency.
|
|
Performance Parameters
|
|
|
|
Working Pressure
|
Maximum 1.8 MPa
|
Under normal operating conditions, the seal can withstand up to 1.8 MPa of pressure, preventing the leakage of pumped media.
|
|
Working Temperature
|
-25ºC - 160ºC
|
Capable of operating efficiently within this wide temperature range, making it suitable for both cold - and high - temperature industrial applications.
|
|
Linear Velocity
|
Maximum 12 m/s
|
The seal can handle a maximum linear velocity of 12 m/s, ensuring stable performance even in high - speed rotating equipment.
|
|
Applicable Media
|
|
|
|
- Water - based Fluids
|
Suitable for clean water, coolant solutions, and water - based chemical mixtures with a pH range of 2 - 13.
|
|
|
- Oil - based Fluids
|
Compatible with lubricating oils, hydraulic oils, and some synthetic oil - based substances.
|
|
|
- Gas - based Media
|
Can be used in applications with non - corrosive gases under appropriate pressure and temperature conditions.
|
|
|
Installation and Maintenance
|
|
|
|
Installation Method
|
Axial Installation
|
Installed axially onto the pump shaft following a precise installation procedure to ensure correct positioning and sealing.
|
|
Installation Torque
|
12 - 18 N·m
|
During installation, a torque within this range should be applied to secure the seal properly without causing damage to the components.
|
|
Maintenance Cycle
|
Every 4000 operating hours
|
Regular maintenance is recommended every 4000 hours of operation. This includes inspecting the seal for signs of wear, leakage, and proper alignment.
|
|
Storage Conditions
|
Store in a dry, cool place at a temperature between 5ºC - 25ºC. Avoid exposure to direct sunlight and aggressive chemicals.
|
Proper storage conditions help maintain the integrity of the seal materials and prevent premature degradation.
|
|
Quality and Certification
|
|
|
|
Service Life
|
Approximately 2 - 3.5 years under normal operating conditions
|
With proper operation and maintenance, the Queeny - SLC seal can provide reliable service for 2 - 3.5 years.
|
|
Leakage Rate
|
≤0.05 mL/h
|
Engineered to have an extremely low leakage rate, ensuring minimal loss of pumped media and maintaining system integrity.
|
|
Certification Standards
|
ISO 9001, ISO 14001, and industry - specific certifications (if applicable)
|
Meets international quality management and environmental management system standards, ensuring consistent quality and environmental compliance.
|
|
Other Characteristics
|
|
|
|
Vibration Resistance
|
Can withstand vibrations with a frequency range of 3 - 60 Hz and an amplitude of 0.6 mm.
|
Designed to maintain its sealing performance in environments with moderate to high vibration levels.
|
|
Self - lubricating Property
|
The seal faces are treated with a special self - lubricating coating to reduce friction and wear, enhancing the seal's durability.
|
This feature minimizes the need for additional lubrication and extends the service life of the seal.
|
Shanghai Queeny Mechanical Equipment Co.,Ltd.is an enterprise specializing in the R&D,manufacture and export of mechanical seal products,headquartered in Pudong New Area,Shanghai.Our products mainly include component seals,dry gas seals,metal bellows seals,mixer and agitator seals,single & dual cartridge seals,silicon carbide parts and tungsetn carbide parts,which can replace John Crane, Burg--mann, AES, Chesterton,Flowserve,Rotenand other similar products,they are widely used in water treatment,petroleum,chemical,food,medical and other industries.Q1: Are you a trading company or a factory?
){kind=link}