Qt-244 Dust-Proof Seal Hydraulic Packing Dust Wiper Seal Ring

• Customization: Available
• Structure: Single End
• Pressure: Medium Pressure Mechanical Seals
• Model NO.: QT-244
• Speed: General Speed Mechanical Seal
• Temperature: Temperature Mechanical Seal
• Performance: Wear
• Standard: Standard
• Type: Dust Seal
• Balance: Balanced
• Brand: Queeny
• Price: Lower Than Original
• Delivery Time: Stock
• Quality: 12 Month Guarantee
• Transport Package: Carton
• Specification: as requirement
• Trademark: Queeny
• Origin: Shanghai, China
• HS Code: 8484200090
• Production Capacity: 100000 PCS / Week
• Package Size: 10.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 1.000kg

Product Description

Parameter	Description
Model	QT-244
Seal Type	Single - spring, unbalanced, inside - mounted mechanical seal
Size Range	Shaft/Diameter Sizes: 15mm - 50mm
Housing Bore Size	30mm - 65mm (matching shaft diameter range)
Face Material	Tungsten Carbide (stationary face) and Carbon Graphite (rotating face)
Body Material	Stainless Steel 316
Spring Material	Inconel 718
O - Ring Material	Ethylene Propylene Diene Monomer (EPDM)
Maximum Operating Pressure	1.6 MPa (gauge pressure)
Minimum Operating Pressure	0.05 MPa (gauge pressure)
Maximum Operating Temperature	150°C
Minimum Operating Temperature	- 40°C
Speed Range	Up to 2800 RPM
Leakage Rate	≤ 5 ml/h at maximum operating conditions
Axial End - Float Tolerance	± 0.5mm
Radial Runout Tolerance	≤ 0.05mm
Vibration Limit	≤ 5.6 mm/s (RMS) at operating speed
Chemical Compatibility	Resistant to most non - oxidizing acids, alkalis, and aqueous solutions; suitable for hydrocarbons with some limitations
Lubrication Requirement	Self - lubricating due to carbon graphite face; additional lubrication may be required for some media
Installation Torque	20 - 30 N·m (for mounting bolts, depending on housing design)
Weight	Approximately 0.8 kg - 1.2 kg (varies by size)
Assembly Clearance	Axial clearance: 0.8mm - 1.2mm; Radial clearance: 0.1mm - 0.3mm
Storage Conditions	Store in a dry, clean environment away from direct sunlight; temperature range: 0°C - 40°C, relative humidity ≤ 60%
Recommended Maintenance Interval	Every 12 - 18 months or 8000 - 10000 operating hours, whichever comes first
Disassembly Procedure	1. Release system pressure. 2. Remove housing bolts. 3. Carefully lift the housing off the seal assembly. 4. Inspect all components for wear and damage.
Assembly Procedure	1. Clean all components thoroughly. 2. Apply a thin film of compatible lubricant to O - rings. 3. Position the seal on the shaft, ensuring proper alignment. 4. Install the housing and tighten bolts evenly to the specified torque.
Performance Warranty	12 months from the date of installation under normal operating conditions

Queeny design engineers are able to produce a seals solution for the most basic applications,to those that are extremely complicated and unique. We are able to provide you these solutions supported by life test data and years of excellent field performance.As your partner, we provide sealing solutions for centrifugal pumps,agitators and other rotating equipment, and help you consolidate your brand and market position.

Mechanical sealing adopts the principle of mechanical friction sealing, which has excellent sealing performance, which can effectively prevent leakage and protect the safety of the environment and equipment. Compared with traditional packing seals and rotary seals, the sealing effect of mechanical seals is more reliable.

 

Our products are made of high quality materials and manufacturing processes, with a long service life and low cost of use. It can effectively reduce the maintenance costs and operating costs of equipment .

 

Our mechanical seals are designed to be easy to service and replace,simply by removing the sealing components and replacing the sealing surface and sealing ring. Compared with other sealing forms, our products are more convenient to repair and replace.

 

Mechanical seal is suitable for high temperature, low temperature, high pressure, vacuum and corrosive media and other complex environment, to ensure the stable operation of the equipment.

Shanghai Queeny Mechanical Equipment Co.,Ltd.is an enterprise specializing in the R&D,manufacture and export of mechanical seal products,headquartered in Pudong New Area,Shanghai.Our products mainly include component seals,dry gas seals,metal bellows seals,mixer and agitator seals,single & dual cartridge seals,silicon carbide parts and tungsetn carbide parts,which can replace John Crane, Burg-mann, AES, Chesterton,Flowserve,Rotenand other similar products,they are widely used in water treatment,petroleum,chemical,food,medical and other industries.
Relying on first-class technology and professional services,since its establishment, Queeny has carried out in-depth cooperation with hundreds of companies in more than 70 countries around the world.Our products are exported to Asia,Europe,North America,South America,Oceania and Africa in large quantities every year,and have been widely praised.Super high cost performance is the basis of our long-term cooperation with customers.We always rigorously treat clients' requirements,strictly control the production process,and comprehensively monitor the export procedure.It is our mission to reduce production and operation costs for more enterprises all over the world.Q1: Are you a trading company or a factory?
We are a factory, so we can offer you factory prices with high quality.

Q2: Can I get samples?
Yes. You can ask for samples. Usually it's free, but you need to pay for shipping.

Q3: Can l use my own logo or design on the goods?
Yes, we provide OEM/ODMservices; your logo and design can be printed on the products.

Q4: What are your payment terms?
We accept T/T, Paypal, Western Union, and credit card payment is also welcome.

Q5: How about the delivery time?
For stock items, we can ship immediately after receiving the payment.
For other products, we need 14-25 days for mass production, which depends on the quantity and type of order.

Q6: How can we ensure the quality?
Pre-production samples are required before mass production;Final inspection is required before shipment;

Q7: 1 can't find our products in your catalog, can you customize the products for us?
Yes, customized products are available, OEM is welcome.

Q8: Can l buy pumps or pump parts from your company?
Yes, we also provide pumps and pump parts.