Customization: | Available |
---|---|
Structure: | Single End |
Pressure: | Medium Pressure Mechanical Seals |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Parameter
|
Details
|
Model
|
QT-MG9
|
Application
|
Suitable for general industrial pumps, mixers, and agitators in chemical, pharmaceutical, and food processing industries.
|
Seal Type
|
Single - spring, unbalanced, inside - mounted mechanical seal
|
Seal Face Material
|
Static Face: Silicon Carbide Rotating Face: Tungsten Carbide
|
O - Ring Material
|
EPDM (Ethylene Propylene Diene Monomer)
|
Spring Material
|
Stainless Steel 316
|
Shaft Size Range
|
15 mm - 50 mm
|
Maximum Pressure Rating
|
1.6 MPa (16 bar)
|
Minimum Pressure Rating
|
0.05 MPa (0.5 bar)
|
Maximum Temperature
|
120 °C
|
Minimum Temperature
|
- 20 °C
|
Maximum Rotational Speed
|
2800 RPM
|
Leakage Rate
|
≤ 5 ml/h at maximum operating conditions
|
Axial Length
|
35 mm - 60 mm depending on shaft size
|
Radial Clearance
|
0.1 mm - 0.3 mm
|
Seal Face Flatness
|
≤ 0.0009 mm
|
Seal Face Roughness
|
Static Face: Ra ≤ 0.2 μm Rotating Face: Ra ≤ 0.3 μm
|
Spring Rate
|
15 N/mm - 25 N/mm
|
Spring Compression
|
5 mm - 8 mm
|
Chemical Compatibility
|
Resistant to a wide range of non - aggressive chemicals, water - based solutions, and some organic solvents. Not suitable for highly oxidizing or strong acid/alkali environments.
|
Installation Torque
|
8 N·m - 12 N·m for securing the seal assembly
|
Storage Conditions
|
Store in a dry, clean environment at temperatures between 0 °C - 30 °C and relative humidity less than 60%.
|
Maintenance Interval
|
Recommended inspection every 6 months under normal operating conditions; replacement every 1 - 2 years depending on usage and operating environment.
|
Weight
|
0.5 kg - 1.2 kg depending on shaft size
|
Certification
|
Complies with ISO 21049:2004 and API 682 standards
|
Packaging
|
Each seal is individually packed in anti - static plastic bags with desiccants and placed in a cardboard box with foam inserts for protection.
|